Camlab now offers automated water analysis solution for BOD by day and titration by night

The PC-BOD™ systemCamlab, one of the UK's leading scientific suppliers and service/repair agents, has been appointed by Man-Tech Associates to represent and support the company's range of automated water quality analysers in the UK.

The PC-BODTM system, which is designed to automate the 5- and 7-day BOD analysis method, simplifies the complex BOD measurement procedure required by many discharge consents to analyse the quality of wastewater.   The system is designed to automate dilution water, seed and inhibitor addition as well as rinsing procedures, critically the system simplifies the whole measurement process for BOD5.

Featuring a durable autosampler, the PC-BODTM system provides a range of rack configurations to suit the users sample requirements all designed around the standard 300ml BOD bottle.  The rinse pump, liquid level sensor control and BOD probe stirrer control are built in to a compact module.  The pumps are designed to deliver accurate volumes at a speed which ensures sample trays can be completed in reasonable time-scales, a liquid level sensor ensures that no samples are overloaded.  The PC-BODTM oxygen measurement is delivered by a standard BOD probe allowing for easy replacement when required.

The PC-BODTM enables laboratories to conform to regulatory Norms such as Standard Methods 5210B, 21st edition; Standard Methods 5210B, 20th edition; and DIN EN 1899-1.

Camlab can also configure a number of variants of the PC-BODTM technology to address differing laboratory operating requirements.  The cost-effective PC-BODTM Mini system, an 11 bottle capacity solution, is ideal for laboratories needing to prepare and analyse samples for BOD5 at a rate of five to 50 samples a day, for three, five or seven days per week.  The key element of all of the PC-BODTM systems is the software used for the BOD calculation, the Man-tech BOD software offers a significant improvement on the built in calculation in many commercial dissolved oxygen meters.  The software and autosampler setup are seamlessly linked in one package on the control PC.

Offering a simple upgrade path, Man-Tech's PC-BOD/Titrate DuoTM enables laboratories to prepare and analyse samples for BOD5 then, with the simple change of a rack and probe holder, analyse different samples for pH, conductivity, alkalinity, turbidity and more.  The system allows organisations to carry out BOD sampling and titration with a single integrated system.  The PC-BOD/Titrate Duo is best suited for environmental laboratories with smaller to medium sized throughput.  The duo system can be purchased as an upgrade to an existing PC-BODTM or PC-TitrateTM system, ensuring upgrade flexibility whatever the initial purchase.

David Miller, Business Development Manager of Camlab Ltd said: "Mantech's PC-BODTM technology offers an automated BOD analysis solution that is not only simple to operate but is also scalable.  BOD measurement is inherently a complex procedure but Mantech's intuitive software capabilities help to simplify the overall process and make it possible to readily add an automated water quality analyser to the same sampler at a later date if and when required.  The degree of scalability makes the Mantech technology a highly cost-effective water quality analysis package.  The PC-BODTM Mini is the perfect size for the smaller laboratory and offers an even quicker return on investment for laboratories that run only a few BOD samples per day."

For more information on the Mantech PC-BOD technology and for technical articles please contact the UK agent for PC-BOD, Camlab Ltd, on 01954 233100, email mantech@camlab.co.uk or visit www.camlab.co.uk/mantech


If you have not logged into the website then please enter your details below.



 

Subscribe to any of our newsletters for the latest on new laboratory products, industry news, case studies and much more!

Newsletters from Lab Bulletin

 

Request your free copies HERE

 

 

 

Popular this Month

Top 10 most popular articles this month

 

 

Today's Picks

 


 

Looking for a Supplier?

Search by company or by product

 


Company Name:

Product:


 

 

 

 

Please note Lab Bulletin does not sell, supply any of the products featured on this website. If you have an enquiry, please use the contact form below the article or company profile and we will send your request to the supplier so that they can contact you directly.

Lab Bulletin is published by newleaf marketing communications ltd.